Home > Soft Magnetic Alloys >

Thickness 0.05~2.0mm Soft Magnetic Alloys 1J50 with High Saturation Magnetic Flux Density

Product Categories

Suzhou Xunshi New Material Co., Ltd

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

Thickness 0.05~2.0mm Soft Magnetic Alloys 1J50 with High Saturation Magnetic Flux Density

Name: Thickness 00520mm Soft Magnetic Alloys 1J50 with High Saturation Magnetic Flux Density
Brand: XUNSHI
Price: 1 USD

Thickness 0.05~2.0mm Soft Magnetic Alloys 1J50 with High Saturation Magnetic Flux Density Manufactures

Brand Name : XUNSHI

Model Number : 1J50

Certification : ISO 9001:2015

Place of Origin : China

MOQ : 50kg

Price : Negotiable

Payment Terms : T/T

Supply Ability : 5000 kg per month

Delivery Time : 30-35 days

Packaging Details : Plywood case

Equal grades : Ni50, Hyperm52, Alloy50, Magnifer 50

Thickness : 0.05~2.0mm

Width : 10~200mm

Spec : GB/T 32286.1-2015

Product Name : Soft Magnetic Alloys

Contact Now

A-ONE ALLOY supplies 1J50 soft magnetic cold rolled strip with minimum thickness 0.05mm

1J50 is a widely used soft magnetic alloy in China. It is used where high initial permeability, maximum permeability, and low core loss is needed.

Density: 8.2g/cm3

Curie point: 500°C

Saturation magnetostriction: 25 ppm

Applications

Transformer cores, highly efficient motors, shielding, and specialized electronic devices, such as LF power transducers, chokes, relay parts, solenoids & oscillators.

Chemical composition

Element	C	P	S	Cu	Mn	Si	Ni	Fe
Weight(%)	0.03 max.	0.020 max.	0.020 max.	0.20 max.	0.30~0.60	0.15~0.30	49.0~51.0	Balance

Heat treatment

1100°C~1180°C, held for 3~6 hours, cooled to 600°C at a speed below 200°C/h , then cooled to below 300°C at a speed of no less than 400°C/h. Take out from furnace.

The parts heat treated should be handled with care, no vibration, no squeezing, no impacting. Or the magnetic properties will be worse.

Thickness 0.05~2.0mm Soft Magnetic Alloys 1J50 with High Saturation Magnetic Flux Density

Product Tags:

soft magnetic iron

soft ferromagnetic materials

Thickness 0.05~2.0mm Soft Magnetic Alloys 1J50 with High Saturation Magnetic Flux Density Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Suzhou Xunshi New Material Co., Ltd
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!